Probes & Acc There are 19 products.

Probes & Acc

The “Electrodes and sensors” family offers a range of probes/sensors for measuring the most important chemical and physical properties of freshwater and saltwater aquariums.

  • Aquatronica Redox electrode
    Available

    Aquatronica Redox electrode

    The Redox electrode (ORP) is for measuring the ORP value in the aquarium in continuous immersion. It must be connected to the power unit through the dedicated interface. Thanks to the Aquatronica systems flexibility, it is possible to simultaneously connect and monitor several electrodes and interfaces on the same system.

    The Redox electrode (ORP) is for measuring the ORP value in the aquarium in continuous...

    The Redox electrode (ORP) is for measuring the ORP value in the aquarium in continuous immersion. It must be connected to the power unit through the dedicated interface. Thanks...

    CA $98.95

    Add to cart
    View
  • Aquatronica pH electrode
    Available

    Aquatronica pH electrode

    The pH electrode is for measuring the pH level on an aquarium in continuous immersion. It must be connected to power units through the appropriate interface. Thanks to the Aquatronica systems flexibility, it is possible to simultaneously connect and monitor several electrodes and interfaces of the same type.  

    The pH electrode is for measuring the pH level on an aquarium in continuous immersion....

    The pH electrode is for measuring the pH level on an aquarium in continuous immersion. It must be connected to power units through the appropriate interface. Thanks to the...

    CA $89.95

    Add to cart
    View
  • Aquatronica High conductivity electrode
    Available

    Aquatronica High conductivity electrode

    The high conductivity electrode is used to measure the Conductivity value (density) in continuous immersion in salt water aquariums. This value can be displayed as Conductivity, Density, Specific Gravity and Salt level.

    The high conductivity electrode is used to measure the Conductivity value (density) in...

    The high conductivity electrode is used to measure the Conductivity value (density) in continuous immersion in salt water aquariums. This value can be displayed as Conductivity,...

    CA $189.95

    Add to cart
    View
  • Aquatronica Temperature sensor
    Available

    Aquatronica Temperature sensor

    The temperature sensor is used to measure the temperature of the water in continuous immersion.

    The temperature sensor is used to measure the temperature of the water in continuous...

    The temperature sensor is used to measure the temperature of the water in continuous immersion.

    CA $39.95

    Add to cart
    View
  • Aquatronica Level sensor
    Available

    Aquatronica Level sensor

    The level sensor is used to check the level of water in the aquarium or in an external filter (sump), providing, for example, the possibility to top-up the water automatically thanks to the controller’s special program.

    The level sensor is used to check the level of water in the aquarium or in an external...

    The level sensor is used to check the level of water in the aquarium or in an external filter (sump), providing, for example, the possibility to top-up the water automatically...

    CA $44.95

    Add to cart
    View
  • Aquatronica Water leakage sensor
    Available

    Aquatronica Water leakage sensor

    The water leakage sensor is used to detect feasible leakages of water on flat surfaces where the aquarium is positioned: in this way, based on how it is programmed, certain functions can be enabled or disabled and/or some alarms can be triggered to minimize damages.

    The water leakage sensor is used to detect feasible leakages of water on flat surfaces...

    The water leakage sensor is used to detect feasible leakages of water on flat surfaces where the aquarium is positioned: in this way, based on how it is programmed, certain...

    CA $44.95

    Add to cart
    View
  • Aquatronica Probes & eletrodes bracket
    Available

    Aquatronica Probes & eletrodes bracket

    The probe bracket is used to fit all types of Aquatronica probes and electrodes in aquariums.

    The probe bracket is used to fit all types of Aquatronica probes and electrodes in...

    The probe bracket is used to fit all types of Aquatronica probes and electrodes in aquariums.

    CA $19.95

    Add to cart
    View
  • Bubble Magus Magnet Probe Holder
    Available

    Bubble Magus Magnet Probe Holder

    Probe holder can fit up to four probes. Its design to hold ph, ORP, salinity and/or temp probe. It has a magnet on the back and can be easily install on the sump wall, baffle divider or aquarium wall. Magnetic can work up to 3/4″ thick acrylic or glass.

    Probe holder can fit up to four probes. Its design to hold ph, ORP, salinity and/or...

    Probe holder can fit up to four probes. Its design to hold ph, ORP, salinity and/or temp probe. It has a magnet on the back and can be easily install on the sump wall, baffle...

    CA $39.95

    Add to cart
    View
  • Zoo Med Mag Clip
    Available

    Zoo Med Mag Clip

    Industrial strength magnetic suction cup with interchangeable clips. Never replace your suctions cups again! Includes 6 assorted sizes of nylon clips to hold all types of aquarium accessories like canister filter outlet tubes, aquarium heaters, filter intake tubes, filter spray bars, airline tubing etc.

    Industrial strength magnetic suction cup with interchangeable clips. Never replace your...

    Industrial strength magnetic suction cup with interchangeable clips. Never replace your suctions cups again! Includes 6 assorted sizes of nylon clips to hold all types of...

    CA $12.95

    Add to cart
    View